What are those partnerships?

Let’s start with Chrysler–they recently filed for Chapter 11 and partnered with successful European car company Fiat.  Now, with this filing of Chapter 11, the chief at Fiat has stated he is ready to pull Chrysler, once one of the Big 3, out of the bottom and back up to the top.

Meanwhile in Detroit, GM has partnered with another one of the European auto heavyweights Alfa Romeo. This marks the return of Alfa Romeo to the United States and yet some more possibilities for more microcars to drive!

What will they bring?

Before they left the United States market in 1995, Alfa Romeo had a reputation for having well-designed automobiles; however, the quality was lacking.  Fourteen years later, Alfa is ready to make its mark back in the US market and we at MicroCar Magazine are most excited about how the quality of an Alfa has improved over the years. The Mi To has been a well-received microcar in Europe and judging by the design, it will fit in very well here in the States.  What we are not sure about is how much power will be equipped in the Mi To and what the price point will be.

photo take by Fiat

Also making a return since it left in 1917 is Fiat, which comes to the United States to bring more micro goodness.  The 500 was first introduced in 2008 with a grand 500th hour reveal at the London Eye and it may not be the only possible microcar to be brought into the States.  Enter the FORD Ka, built through a partnership with Fiat and Ford in Europe.  This car could propose a challenge for SMART.  The Ka has about the same wheelbase as the SMART, but unlike the SMART, don’t look for the Ka to be easy to modify.

How powerful and how much?

No real information is available at this time, but as we receive news from around the world, we will update you. What can be said or at least questioned is whether these two European titans can unseat other microcar companies like Toyota or Honda.

For today’s spotlight I will be reviewing Tanabe’s DF210 series springs, providing the lowest drop without taking the plunge into coils or bags.  The drop rate is, according to Tanabe, 1.9 Front and 2.2 Rear, respectively.  Where as most springs will follow the height ratio of the manufacturer, the DF’s will bring the body completely level, rather than slightly (ever so slightly) raked up in the rear as the OEM set up is.  For this reason, there is a noticeable gap in the front fenders between the wheels (as seen with OEM steelies+dunlops), where the rear is actually flush with the quarter panel line.   Overall, this would be my overall gripe with the product.  Everything else is flawless.

Handling/Daily Driving

The biggest concern people have with a lowered car is not necessarily handling, but how will it FEEL when driving through town?  Before I address how it feels, I’d like to give you my insight on what “harsher” ride quality means.  In my opinion, a harsher ride can vary from strong jolts whenever riding over a pothole (eek!), and can include the extra body movement you feel as you go over a small hump in the road.  In my 1100 mile experience, the only thing you’ll notice is that extra body travel as you ride over a small hump.  The ride isn’t uncomfortable or disheveling in any way, and to be quite honest, is still just as soft and cushy as the OEM springs.  (Let me say now, that I’m riding on the OEM Shock/Strut set up, so ride quality and handling improvements are solely based off the springs alone).

Handling, as with any worthwhile suspension upgrade, brought an immediately noticeable improvement in cornering.  Hard cornering, when paired with some sticky tires, should be no problem for this set up.  Seeing as how I’m riding on all seasons, my handling through hard corners isn’t quite up to par, but I can assure that the crispness is there, and VERY enjoyable.  Pair it with a nice, thick, rear sway, and I think all xD owners will have a thrilling little ride on their hands!

Kit Includes
-Tanabe DF210 Springs
-Tanabe Stickers (YEA!!)

Tools/Install

Tools required are as follows:

-Torque Wrench (yes it’s first. Anyone planning on doing DIY work for their cars should have a good Torque Wrench!)
-Sockets: 10, 14, 17, 22 mm
-A 17mm offset wrench (had to run out to the store to buy this one)
-6mm allen wrench
-Last but not least, a Spring Compressor for the front springs

Overall Install

The install wasn’t horrible, and it definitely wasn’t my first time working on suspension.  However, having said that, I did struggle with the front struts because of Toyota’s genius Wiper Guard design.  Instead of following logic, I opted to not remove this piece, and struggled for a good hour, harshly stripping the top nut for my front driver side strut.  So let this be a warning to you: DO NOT SKIP THIS PROCESS.  Remove the Wiper Guard, and all will be happy.

Final Review

I truly enjoy my xD with the DF’s installed, and would recommend them to anyone looking to drop their car.  Dont be scared by the 2″  drop, it’s really not bad at all.  Theres still a 7″ clearance.  If you live in a pothole ridden area of town, or commute to a pothole ridden area, fear not!  My locale has by far some of the worst roads I’ve ever driven on, and my little xD survives just fine, drop and all.  So don’t be afraid!  Get as low as y ou can, and enjoy every inch of it!

-Corey