I received my console via postal service today, straight from Japan.  Originally I was going to hold off on the install, but after pulling everything out, I decided I may as well!

Parts Included :

Console Body

Bottom Cover

Console Deck

Mounting Racks

various screws for installation

Tools Required :

Screw Driver…

Installation :

As you can see from the large Tool list, this is a fairly simple installation.  There are two mounting racks that slide and hug onto both front seat tracks, from the bottom.  Pull them all the way towards you and they’ll sit in place, slightly sagging but that will be fixed once everything is screwed into place.  Position the legs of the console deck onto the mounting racks, and line up two holes to screw it into place on each side.  You’re halfway done, MAN I love simple installations like this!  Pop the bottom cover onto the console body, and set it over the deck.  The bottom cover allows a flush appearance when the console is put into place.  Set the console body on top of the deck, and open up the main section to screw it into place.  There are four holes, and four small screws to keep the console in place.  Throw in the nice fuzzy bottom piece (much like what’s in our door handle areas) to cover up the screws, close up the section, and enjoy what 5 minutes of hard work has given you; a nice storage console/arm rest!!

As a young man who is 6′ tall in stature, I find the console to be relatively low; certainly comfortable for me, but definitely nothing that would be overbearing to an xD owner of any build!  Seeing as how it IS an OEM piece, it flows well with the interior; an extreme wonder why Toyota never decided to bring it over to the states!

That’s about it for now…Hope you all enjoyed the write up, and should you purchase the console, enjoy it as well!

Next up for me?  HID installation!  I’ll actually need my own pictures for that install guide, so we’ll see how that goes

-Corey